A resin-bound driveway is a fantastic addition to many homes or properties, but regular maintenance is essential to ensure they look great. Most people want a labour and time-saving device that doesn't compromise on the quality of work, and this is why many people ask can you jet wash a resin-bound surface?
The Resin Crew knows the answer, and the best way to ensure resin-bound surfaces look fantastic, and we are more than happy to share everything we know about jet wash solutions, power washing, and how to best care for a resin-bound surface.
Yes, it is generally safe to power wash resin driveways. Power or pressure washing can effectively clean resin driveways by removing dirt, debris, stains, and other contaminants. However, it's essential to use the appropriate techniques and settings to avoid causing damage to the surface.
Here are some guidelines for power washing a resin-bound driveway:
Choose a pressure washer with adjustable pressure settings. Using a lower pressure setting is recommended to avoid damaging the resin surface. A pressure washer with a maximum pressure of around 1,200 to 1,500 psi (pounds per square inch) is typically suitable for resin-bound driveways.
Select a wide-angle nozzle, such as a 25-degree or 40-degree nozzle, to disperse the water spray over a larger area. This helps prevent concentrated pressure on a specific spot, which could damage the resin surface.
Keep a distance of at least 12 to 18 inches between the pressure washer nozzle and the resin driveway. This distance ensures the water pressure is spread out and minimizes the risk of damaging the surface.
Before starting the power washing process, test the pressure washer on a small, inconspicuous area of the driveway to ensure it does not cause any damage or discolouration. Clean the rest of the driveway if you don't see any adverse effects.
In some cases, a mild detergent formulated with pressure washers can help remove stubborn stains or dirt. Follow the manufacturer's instructions for the detergent and ensure it is safe for resin surfaces.
Move the pressure washer wand or nozzle sweepingly, covering the entire driveway surface evenly. Avoid staying in one spot for too long to prevent damage.
By following these guidelines and using proper techniques, power washing can effectively clean resin-bound surfacing and restore its appearance. If you need more clarification or want to ensure the best results when cleaning resin-bound paving, please ask for guidance from professionals with experience in cleaning a resin-bound system.
The best way to clean resin surfaces is by following these steps:
Start by sweeping or using a leaf blower to remove any loose dirt, leaf debris, chewing gum, or debris from the driveway's surface. Look out for moss growth and stains from tyre marks before you clean.
If there are any stubborn stains or marks on the driveway, pre-treat them before cleaning. Use a mild detergent or a specialised resin cleaner, following the manufacturer's instructions. Apply the cleaner to the affected areas and let it sit for a few minutes to loosen the stains.
Use a pressure washer or a jet washer with a wide-angle nozzle to clean the entire surface of the resin driveway. Keep the flat nozzle at a safe distance, typically 12 to 18 inches away from the surface, to avoid damaging the resin, and to see the original surface restored.
Move the wand or nozzle in a sweeping motion, covering the entire driveway evenly. Use a low to medium pressure setting (around 1,200 to 1,500 psi) to prevent potential damage to the resin driveway through excessive water pressure. You can also check out our post "How Long Do Resin Driveways Last" for more additional insights.
After washing at a moderate temperature, thoroughly rinse the driveway and outdoor surfaces with clean water to remove any remaining detergent or residue. Ensure you wash away the cleaning solution to avoid leaving streaks or marks on the surface.
Let the driveway air dry completely before walking or driving, avoiding excessive pressure. This usually takes a few hours, depending on weather conditions, before you can introduce light vehicle traffic.
To keep your resin driveway looking its best, perform maintenance tasks such as sweeping away debris, removing any weeds or moss, and promptly addressing any stains or spills. Regular maintenance will help prevent dirt buildup and keep the surface in good condition. Our post "How Much Are Resin Driveways" maybe interest you. You can check it out.
It's important to note that harsh chemicals, abrasive cleaners, or high-pressure settings can potentially damage the resin surface. It is natural to want to prevent moss growth but even a mild weed killer can leave unsightly marks and cause further problems when cleaning a resin drive. Don't also miss our article "Do Weeds Grow Through Resin Driveways" - it offers valuable insights into this important topic.
No, there is no significant difference between jet and pressure washing. These terms are often used interchangeably and refer to the same cleaning method. Both techniques involve using a high-pressure water spray to clean surfaces, removing dirt, grime, and other contaminants.
The water is propelled through a nozzle at a high velocity, exerting pressure on the surface. This method is effective for various applications, including cleaning driveways, patios, decks, and exterior walls, more so than soapy water.
Yes, there is a slight difference between jet washing and power washing. While the terms are often used interchangeably, there is a subtle distinction between them.
Jet washing typically refers to using a high-pressure water jet for cleaning surfaces. It involves directing a concentrated, focused stream of water at high pressure to remove stains, grime, and dirt. A standard jet wash is commonly associated with using handheld attachments that emit a powerful, narrow stream of water, providing intense cleaning for specific areas.
On the other hand, power washing generally refers to using gardening machinery or equipment that combines high-pressure water with a heating element or a heating coil. The warm water, under high pressure, is used to clean surfaces. The heat helps to break down stubborn dirt, grease, and stains, making power washing particularly effective for deep cleaning tasks.
While both methods involve using high-pressure water to clean surfaces, the distinction lies in including heat in power washing. Jet washing typically uses cold water, whereas power washing involves using hot water to enhance cleaning power.
In practice, "jet washing" and "power washing" are often used interchangeably, and the choice between them may depend on the specific equipment or tools in use. Ultimately, both methods can be effective for cleaning surfaces, including driveways, decks, and exteriors, but power washing with heated water may provide additional benefits for particular cleaning tasks.
If you are going to jet wash resin-bound surfacing or resin-bound paving, please remember these tips:
These tips will help you achieve effective cleaning while minimising the risk of damage to the resin surface.
You don't need a strong bleach solution or a stiff broom to remove tyre marks, dirt, chewing gum, or oil spills from a resin surface or block paving. A high-pressure jet wash or power wash removes surface debris and halts weed growth from your resin drive, and when used correctly, won't damage your surface.
